Xbox 360 wireless gaming receiver for Windows allows you to connect up to four wireless headsets and four wireless controllers on a computer running Microsoft Windows XP Service Pack (SP2) or later versions of Windows.
Note – Receiver not intended for use in the Xbox 360 console.
The controller is wired network information about connecting to a computer wired controllers are contained in the following article in the Microsoft Knowledge Base:
906347 (http://support.microsoft.com/kb/906347/) How to connect to a computer running Windows your wired Xbox 360 controller.
Step 1: Connect the wireless receiver Xbox 360 games to PC
1. Removal of the green label is the USB connector on the receiver.
2. Insert the USB connector on the computer running port USB 2.0.
# Note – USB Ports on the front of the computer, probably not connected ports USB 2.0. Try to use the ports on the back of your computer.
The green LED on the receiver indicates that the device works.
# If you automatically start the installation wizard equipment, Automatic (recommended) and click command Äàëåå. If the wizard installs the software successfully, click button end go to "Step 3: Connect to the Xbox 360 wireless standard program on your computer" below.

If the wizard could not install the software, go to "Step 2: Install the software receiver Xbox" section below.
Step 2: Install xbox 360 controller software
Before you use a standard wireless network with the computer may need to install xbox 360 controller software on your computer. If you have an installation disk that came with your receiver Games Xbox 360 wireless network, you can install the software on this disk. If you do not drive, you can install the software by downloading it from the Internet.
To install from the CD-ROM:
1. Insert the installation CD of xbox 360 controller software into the CD-ROM or DVD-drive.
If the installer does not launch automatically, navigate to the CD-ROM or DVD-ROM drive and run the setup program. 2. Follow the wizard to install the software. Note - May be prompted to restart your computer.
To install the software by downloading it from the Internet:
1. Go to download games on a Web site equipment corporation at the following link:
  http://www.Microsoft.com/Hardware/Download/Download.aspx?Category=Gaming&Type=Gaming (http://www.microsoft.com/hardware/download/download.aspx?category=Gaming&type=Gaming)
2  Select Product Type SELECT controller. 3 Choose a product select receiver Games Xbox 360 Wireless Network for Windows. 4 Select the operating system, select the version of Microsoft Windows, using the computer. 5 Select the language of the operating system, select the language used by the Windows operating system on your computer. 6 Then-Go. 7 Click the link to start the setup program. Then - Run.
The installation program standard Xbox 360 installs the necessary files on your computer.
Note - May be prompted to restart your computer.

Step 3: Connect your Xbox 360 wireless standard program on your computer
1. Turn on the utility wireless Xbox 360, you must use with your receiver.
For example, for inclusion on the controller, press and hold the guide located in the middle of the controller. If you do not know how to turn a standard program, read the documentation, is allow.
2. On the receiver, press the connect button. The light flashes green.
3 .On the wireless accessory, press the connect button. For example, on the controller, the connect button is on the back.
Support for Xbox -Please visit the following Web site for information about how to contact Xbox Support:
http://www.xbox.com/support/contact (http://www.xbox.com/support/contact)